In certain cases, it may be necessary to know the signals sent through a sonde connector cable – from the sonde connector through the NexSens’ UW Plug and into a submersible data logger. Information on pins and corresponding signals is below.
![](http://www.nexsens.com/wp-content/uploads/2013/07/table102.png)
Sonde Connector Pin Numbers
![](http://www.nexsens.com/wp-content/uploads/2013/07/table103.png)
Figure 2: UW Plug Pin Numbers
![](http://www.nexsens.com/wp-content/uploads/2013/07/table104.png)
Figure 3: Sonde Connector to UW Plug
REV: 13G18