The MS8-CON is a connectorized cable with the MS8 male connector on one end and the Lufft connector on the other end. The cable allows for communication in RS-485 between a Lufft sensor and an iSIC data logger.
![](http://www.nexsens.com/wp-content/uploads/2013/07/table281.png)
Figure 1: Lufft to MS8 Cable Assembly
![](http://www.nexsens.com/wp-content/uploads/2013/07/table282.png)
Figure 2: Wiring for Lufft M12 to MS8 Male
REV: 13G29