An MS2 connector is used to supply power to an iSIC Data Logger. It has two openings – one for power and the other for ground. An MS2 connector can be found on the A11 float charger (power adapter) and the solar panels of iSIC MAST systems.

 

MS2

Figure 1: MS2 Connector

The port which connects the MS2 connector to an iSIC Data Logger has two pins – one for power and the other for ground.

MS2 Port

Figure 2: MS2 Port on iSIC Data Logger

REV: 13J11

Leave a Reply

Your email address will not be published. Required fields are marked *