Automatically generated reports from WQData LIVE often need to have their start times offset to accommodate for the upload delay (due to the latency of sensor sample acquisition and data logger telemetry connection processes) on the final data point. If no offsets are entered, reports that are delivered may be missing the most recent data […]
A Project Picture is displayed in the lower right corner of the default Project Dashboard as well as on the Project tile in a user’s Project selection list. It can also be added as a panel on any Custom Dashboard. To upload a Project Picture, navigate to the main Project Settings configuration menu. Click on […]
Data loggers in a WQData LIVE Project can have custom names assigned. Loggers initially receive a default name that includes the logger type, telemetry type, and body tag number. Name changes are entered in the Device Remote Configuration menu on WQData LIVE. To configure custom names: Navigate to the Device Remote Configuration tool within the administrator settings. […]
Following a sensor detection, all diagnostic and sensor parameters are enabled for logging to the on-board micro SD card and transmission to WQData LIVE via the X2’s on-board telemetry. However, disabling transmission of individual parameters is possible. Disabling transmission of un-needed parameters is sometimes desirable to minimize the amount of unnecessary data sent. This is […]
A separate section of the WQData LIVE Alarm tool allows G2-RAIN users to configure Rain Alerts. When triggered, such alerts notify project personnel that a rain event has occurred. Access this feature by navigating to ADMIN | Alarms at the top of the Project Dashboard. Expand the Rain Alerts section by clicking on the […]
Cellular G2 and iSIC V2 systems allow configuration of increased transmission frequency when a recorded parameter exceeds a user-defined threshold. This event-based transmission enables the system to upload data infrequently and minimize power and data consumption during normal operation, yet increase the frequency of logging and transmission of data during critical events. To configure event-based […]
The WQData LIVE Dashboard Map feature is an aesthetic and informative addition to the Dashboard display. The map gives the user a visual of the area surrounding the data logger, allows GPS-equipped loggers to be tracked, and contains visual updates to indicate triggering of system alarms. Map Features Click anywhere on the map to […]
The Quick Alert feature offers a quick method of configuring email/text message* notifications to send when an individual parameter crosses a basic threshold set by the user. While an alert is active, emails will repeatedly send for each uploaded reading that exceeds the parameter threshold. This feature is useful when using the more advanced Alarm […]
The Alarm feature offers an advanced method of configuring email notifications for parameter measurements. Alarms trigger based on one or more user-defined conditions established in the alarm configuration. Setting Alarms in Administrator Settings The ADMIN menu allows the user to activate alarms or quick alerts that notify project personnel any time that a certain parameter crosses […]
Multiple users can be given access to a WQData LIVE project. User accounts are assigned one of two tiers of access: Admin: Access to all project settings, the ability to add other users, and the ability to view data Collaborator: Data access only Any email address used must be registered with a WQData LIVE account […]
