The X2 is an all-in-one environmental data logger that can be controlled from any internet browser using a smartphone, tablet, or PC. It automatically recognizes sensors and sends data to the WQData LIVE web data center via Wi-Fi, cellular, radio, or satellite telemetry. There, data is presented on a fully-featured and easy-to-use dashboard where remote, […]
The Data Export feature is a quick and simple data acquisition tool that allows users to download or send data through email or FTP in CSV or multiple XML formats without loading data directly onto the WQData LIVE page. This feature removes the latency associated with loading a substantial data set. To access the […]
The log start time and selective upload interval(s) can be set through the Advanced Device Remote Configuration tool. These features allow the X2 to log data to its internal memory at a specific log start time and control the transmission of certain parameters. These features help reduce system data usage and telemetry on-time. Adjust […]
The Advanced Device Remote Configuration tool allows the user to adjust the following: Update data logger settings Set the log and transmit start times Change which parameters are logged and transmitted Change the data logger transmission settings To access the tool: Navigate to the ADMIN | Settings tab found at the top of the project Dashboard. […]
Averaging for sensor parameters may be enabled by adjusting the log and sample intervals in the Device Remote Configuration Tool within the administrator settings. Log Interval: Frequency of data written to the data logger memory to be transmitted to the web. Sample Interval: Frequency of data read from the sensor by the data logger internally. […]
The Device Remote Configuration Tool allows remote configuration of the following: Change sensor logging and transmit intervals Configure event based transmissions for G2 and V2 systems Choose which parameters are logged and transmitted to the web Configure parameter offsets Name a data logger Run a sensor detection Sync X2 data logger settings To access […]
Owners of devices on WQData LIVE may move data loggers between sites as necessary. All device information and collected data will move to the new site. Before moving a logger, it is required that the logger is removed or “unassigned” from its current site. Removing / “Unassigning” a Device To remove / “unassign” a […]
Once an Iridium SBD account is activated and an email server is configured, X2 Iridium data loggers can be configured to post data to WQData LIVE. To configure Iridium X2 logger telemetry settings: Navigate to the Advanced Device Remote Configuration Tool within the administrator settings. Select the Site and desired data logger to make adjustments. Scroll down […]
The X2 is capable of logging data to its internal memory at a certain log interval but transmitting it at a different interval. This feature is useful for reducing the system’s data usage and telemetry on-time (thereby reducing the power consumption) but still monitoring system status remotely. During site visits, users can then periodically access […]
X2 Iridium satellite data loggers transmit data messages via the Iridium network to an email server. The data messages are then downloaded from the email server to the WQData LIVE web datacenter. In order to facilitate this process, NexSens hosts a secure Gmail account as a medium to store and upload data to WQData LIVE. […]
