X3 Logger Buzzer Pattern Indicator

X3 data loggers include an internal buzzer indicator to provide audible system status feedback to the user. The table below outlines the pattern for each process:

Event	Beep Type	Status
Applying power/logger reset	One short beep	System boot successful
Sensor detection/measurement1	One short beep every 3 seconds	Logger currently taking a measurement or detecting sensors
Telemetry connection attempt	Double beep every 3 seconds (Cellular) Triple beep every 3 seconds (Iridium)	Logger attempting to establish a connection with the telemetry service
Telemetry connection successful2	Two short beeps	The logger has successfully established a telemetry connection
Telemetry connection failed	Three short beeps	The logger has unsuccessfully established a telemetry connection. Move to an area with better reception and no overhead obstructions.

¹WQData LIVE integration is automatically performed on telemetry units after the sensor detection is complete.
²After the connection is successful, the logger will revert back to the double or triple beep pattern while it is uploading data or responding to remote commands from WQData LIVE.