UW underwater connectors provide a plug-and-play interface for connection to NexSens SDL500 Submersible Data Loggers.
The SDL500 sensor bulkhead includes sensor connection ports identified as T, P1, P0, A and D.
Figure 1: SDL500 Sensor Bulkhead
T-Node FR sensors and strings can be connected to Ports P0, P1, T, or D. It is recommended to connect to port P1 or T to allow for power to be removed from the T-Node FR sensors between readings. If this is done, ensure Switch Power is setup correctly in iChart.
REV: 13H06