The MS8-BULK is a panel mount cable assembly with the MS8 female connector on one end and flying lead on the other end. To install the MS8-BULK it will be necessary to drill holes in the panel where it is to be mounted. See Figure 3 for proper drilling dimensions.
Included Accessories
- (4) 4-40 1/2″ screws
- (4) #4 lock washers
- (1) Size 12 nut plate
![](http://www.nexsens.com/wp-content/uploads/2013/07/table271.png)
Figure 1: MS8-BULK
![](http://www.nexsens.com/wp-content/uploads/2013/07/table272.png)
Figure 2: Wiring for MS8-BULK
![](http://www.nexsens.com/wp-content/uploads/2013/07/table273.png)
Figure 3: MS8 Female Pinout
![](http://www.nexsens.com/wp-content/uploads/2013/07/table274.png)
Figure 4: Drilling Dimensions for MS8-BULK
REV: 13G29