mV-RS485 Adapter – How To

1. Connect to a mV-RS485 Adapter
2. Change the Modbus Address of a mV-RS485 adapter
3. Configure the mV-RS485 adapter for Li-COR sensors
4. Read the mV value from a mV-RS485 adapter
5. Connect 4-20mA Sensor to a mV-RS485 Adapter
6. Set Gain on a mV-RS485 Adapter
7. Set a Zero Offset on a mV-RS485 Adapter
8. Read/Write mV-RS485 Adapter Modbus Registers