Mount an X2 Environmental Data Logger
The X2’s mounting kit accessory provides an easy way to attach the logger to a pole, pipe or wall. Mount an X2 to a 1-1/2 to 2″ (38 to 50 mm) pole by following the instructions in this guide. Alternatively, user-supplied screws may be used to mount an X2 to a wall.
X2 Mounting Kit Installation
- Attach the bracket to a pole using the included 5/16″-18 x 2″ U-Bolt, 5/16″ flat washers, 5/16″ lock washers, and 5/16″-18 nuts. Tighten with a 1/2″ socket driver or wrench.
![Mount an X2 to pole](https://www.nexsens.com/wp-content/uploads/2017/06/X2_mount_ubolt-295x300.jpg)
Figure 1: Install Pole Bracket with U-bolt.
- Use the included 3/8″-16 x 1-1/8″ socket head cap screw to attach the mounting bracket to the bottom of the X2 with a 5/16″ hex driver.
![](https://www.nexsens.com/wp-content/uploads/2017/06/X2_mount_bracket_pole-184x300.jpg)
Figure 2: Attach security screw.