Knowledge
Base
Change direct timing between iChart and data logger
When using a third party USB to serial adapter it may be necessary to alter the communication timing between iChart and the data logger.
1. Open iChart with the current project.
2. Hold down <ctrl> and <alt> then press "t" (without the quotes). The Communication Timing dialog should appear.
3. Select NexSens DN Sensors from the Device dropdown.
4. Select iSIC (Direct connect) from the Communication Option dropdown.
- Note: Ensure Direct Connect* is not accidently selected.
Figure 1: Communication Timing Dialog
5. Enter 1751 in the Pause after cmd (sec) box.
6. Enter 20 in the Tx char space (msec) box.
7. Click OK.
Figure 2: Change Settings
Additional Help
NexSens strives to provide a rich database of FAQs and troubleshooting guides. If you don't find what you're looking for, though, or if you need additional support to resolve an issue, please contact a tech support representative using the option to the right.
NexSens strives to provide a rich database of FAQs and troubleshooting guides. If you don't find what you're looking for, though, or if you need additional support to resolve an issue, please contact a tech support representative using the option to the right.